- 1). Close all doors, then enter through the driver side door. Leave this one driver side door open.
- 2). Put the Camry key in the ignition and remove it without turning the key. Do this a second time, and be sure this step is done within five seconds.
- 3). Close the driver's door, then open it again. Do this a second time, then put the key into the ignition and remove it. All this needs to be completed within 40 seconds.
- 4). Close the door and open it again. Repeat this for a second time, then put the key into the ignition and leave it there. Close the door again, then turn the ignition key as far as it will go without cranking the Camry engine. Turn the key ignition back off and remove the key. This must all be done within 40 seconds. Wait for the Camry locking system to lock and unlock the doors automatically. If you do not see this happen, repeat steps 1 through 4.
- 5). Press and hold the "Lock" and "Unlock" buttons on the keyless remote at the same time.
- 6). Release the buttons after 1.5 seconds, then press and hold the "Lock" button. Wait for the locking system to lock and unlock the doors again, indicating that the remote has been successfully programmed.