- 1). Park the Sierra and open the door on which you will be installing the mirror.
- 2). Pry out the armrest console with a slotted screwdriver. Disconnect the wiring connector of the armrest console.
- 3). Remove the poppets around the edge of the inner door panel with a slotted screwdriver. Remove the water deflector from the edge of the inner door panel.
- 4). Pull the inner door panel off of the door and disconnect its two wiring connectors. Remove it from the door.
- 5). Remove the three bolts securing the mirror to the door. Remove the mirror and install the new street scene side mirror.
- 6). Reinstall the three bolts to the mirror and reattach the inner door panel. Reinstall the poppets and reattach the inner door panel's wiring connectors. Place the armrest console back onto the door and attach its wiring connector. Close the door and adjust the mirror.
previous post
next post