- 1). Place a stepladder under the garage door opener head. The head is the part of the opener that has the light and houses the motor. Pull the opener power cord out of the electrical outlet in the ceiling.
- 2). Locate the quick connect terminals on the back of the opener head. The quick connect terminal will have the white and black wires from the wall button and photo eyes connecting to the terminal. The photo eye wires usually staple to the ceiling above the opener rail.
- 3). Look at the photo eye wires at the photo eyes and follow the wires to the back of the opener head. Insert a flat-head screwdriver into the quick connect terminal below each wire and press inward to release the wire from the terminal. Remove the black wire and the white wire for each photo eye.
- 4). Move your stepladder down the length of the opener rail to reach the staples securing the photo eye wires to the ceiling. Pull the staples out of the ceiling with a pair of needle nose pliers.
- 5). Remove the wires from each side of the door jamb until all of the photo eye wire is free.
- 6). Remove the screws that secure each photo-eye to the garage door jamb with a socket wrench. Some manufactures secure the photo eye directly to the door track. Remove the bolt that secures the photo eye to the door track with a socket wrench.
previous post