- 1). Lift firmly upward on the front edge of the rear seat's bottom cushion. Pull the cushion forward and take it out of the car.
- 2). Remove one 12-mm bolt from the bottom on both sides of the rear seat back.
- 3). Pry up on the sides of the stop light cover on the rear deck with a panel tool. Remove the cover when loose. Pry the edges of the rear pillar trim panels on either side of the rear deck to release the clips holding them in place. Remove the panels when loose.
- 4). Remove two 10-mm bolts from the front edge of the rear deck panel. Slide the panel forward and remove it from the car.
- 5). Remove three 10-mm bolts from the perimeter of each of the speakers. Lift the speakers up and out of the rear deck. Unplug the wiring connectors on the backs of the speakers.
previous post