How does e track for trailers work? It's really a simple system that helps make transportation logistics much more safe and efficient.
You start by choosing the lengths of track that best fit your space.
E track for trailers is sold in 2', 5' 8' and 10' sections.
The finish can either be galvanized or powder coated.
Galvanized might be preferable if you'll be laying the track down on diamond-plate sheets or in an area the track will come in contact with the elements.
The powder coat finish is hard baked, but still might be susceptible to scratches depending on the amount of use and cargo type.
Installing your e track for trailers isn't difficult, but it does require that you first mark the desired placement of the track and pre-drill the substrate to accept the self-tapping screws.
It's important that you secure the strip through the surface on into the frame or substrate (often plywood).
The screw holes on the track are numerous; while placing a screw into each one may not be necessary, it's advisable to skip no more than two holes between each screw.
When you reach the end of the strip, be sure to place screws in several of the last holes on each side of the track.
But before you place the last screws, slide a plastic end cap over the e track for trailers.
These simple end caps are great as a transition between the raised track and regular floor of your trailer.
They'll prevent stumbles which could lead to big disaster if you're carrying a box of fragile items or something heavy.
To use your e track for trailers, shop for the special fittings hardware that fits into the rectangular slots on the track.
Some of the fittings have o-rings or d-rings on the end, which means they easily accept straps with s-hooks.