- 1). Enter your car and turn your ignition key from "Off" to "Run" three times in quick succession, within five seconds. End with your key in the "Run" position and wait for the locks to cycle once.
- 2). Press and hold both the unlock and lock buttons on your remote, and do not release them until the door locks cycle again. This may take up to 15 seconds.
- 3). Program up to three other remotes by repeating Step 3. You will have to wait for the car locks to cycle just as you did in Step 3; also, you must complete each remote's programming within 30 seconds of programming the prior one.
- 4). Return the key to the "Off" position, once all of your remotes are programmed, to close the programming mode.
previous post